Expert Water Heater Solutions for Houston

Houston Water Heater Repair, Service & Maintenance

We carry more repair parts than most of our competition
because we are service providers that Houston trusts.

Contact our Houston water heaters company if you are unsure whether you might be putting your home and family at risk using an old or outdated water heater inside your home. We don’t all have the time or energy to stay aware of the potential problems and technicalities of the workings of our water heaters, which is where we come in. We also keep up to date on any new laws or regulations relating to plumbing and water heaters for you, so you can trust the Houston plumbers at Wedgeworth Plumbing. Contact us today, fill out the form, or scroll down to see some of our recent reviews!

Request Service Now

water heater houston

Water Heater Repair In Houston

Our water heater repair professionals in Houston fully understand that most people take this important home appliance for granted once they are installed. That is until a plumbing emergency happens while you’re in the shower or tub, the water turns as cold as a lake in Alaska and you start yelling “Hey Margie – what happened to the hot water?”. The projected average life of a home water heater is about 10 years, yet we know from experience that water heaters don’t last that long and some haven’t even performed well since Clinton was president. Our Houston water heaters company is here to relieve you of the stress of water heater issues- just another reason why we’re the best plumber Houston has to offer!

Water Heater Replacement In Houston

Our suggestion would be that if your water heater is acting up and providing you with less than ideal service, our water heater repair service or our Houston water heater replacement service might be the answer for your home and family. It has been our experience that older homes in Houston tend to have potential hazards like leaks related to age. This is a sure sign that our water heater replacement service in Houston could be required and should be done as soon as possible.

Houston Water Heater Replacement

Nobody thinks that a hot water tank could be a safety concern in their homes but we at Wedgeworth Plumbing know better. Our water heater repair service or our Houston water heater replacement service can be the solution. We also recommend that once your water heater repair or water heater replacement in Houston, TX is completed, your hot water should not exceed 125 degrees F. Exceeding this temperature poses serious risk of burns, particularly to younger children. Remember your professional Houston water heater repair service, it’s better to know our Houston water heaters company and not need us, than to need us and not know us.
Your water heater in Houston is a major energy consumer in your home. If your Houston water heater is more than a few years old, you may consider replacing it with a new, energy-efficient State Water Heaters model.

Wedgeworth Plumbing offers service on all bands, sizes and models of Houston water heaters for your home or business. We can install any brand or model of your choice, but recommend and carry various brands on our trucks. We have an outstanding complete guarantee on water heater installations that are above and beyond industry standards. Our guarantees cover the tank, labor and parts for a full 6 or 10 year guarantee! For more information about Houston water heaters and installation, contact us today!

Recent reviews from happy customers

Melissa Ruiz
Melissa Ruiz
21:49 13 Jun 19
Rex and his assistant arrived at the scheduled time. He looked at the problem we were having, gave us the estimate and he had it repaired quickly. They were both very professional and polite. Excellent Service..read more
Lacey Harris
Lacey Harris
15:14 06 Jun 19
Highly recommend. James was AWESOME. He was polite and professional, and gave me honest feedback on the problems we were having. He arrived right on time and took care of things in a timely manner.read more
Tom Guyton
Tom Guyton
12:15 02 Jun 19
Wedgeworth Plumbing and the plumber they sent out to my house were fantastic. He did his inspection in a fast and efficient manner and told me what it would cost, which was very reasonable! I told him to proceed and he did the work and the problem was solved. I will recommend Wedgeworth Plumbing and James to All my friends. Not only did they do a fine job, but the office called several times and gave me updates as to when to expect James. Very Professional!read more

Need help with a water heater?

Selecting a Houston New Water Heater

You have a lot to consider when selecting a new water heater for your home. You should choose a water heating system that will not only provide enough hot water but also that will do so energy efficiently, saving you money. This includes considering the different types of water heaters available and determining the right size and fuel source for your home.

Types of Water Heaters

It’s a good idea to know the different types of water heaters available before you purchase one:

  • Conventional storage water heaters
    Offer a ready reservoir (storage tank) of hot water

  • Demand (tankless or instantaneous) water heaters
    Heat water directly without the use of a storage tank

  • Heat pump water heaters
    Move heat from one place to another instead of generating heat directly for providing hot water

  • Solar water heaters
    Use the sun’s heat to provide hot water

  • Tankless coil and indirect water heaters
    Use a home’s space heating system to heat water

SELECTION CRITERIA

When selecting the best type and model of water heater for your home, consider the following:

  • Fuel type, availability and cost. The fuel type or energy source you use for water heating will not only affect the water heater’s annual operation costs but also its size and energy efficiency. See below for more on selecting fuel types.
  • Size. To provide your household with enough hot water and to maximize efficiency, you need a properly sized water heater. Visit the pages on different types of water heaters (linked above) for more on sizing.
  • Energy efficiency. To maximize your energy and cost savings, you want to know how energy efficient a water heater is before you purchase it. Visit the pages on different types of water heaters (linked above) for more on estimating energy efficiency.
  • Costs. Before you purchase a water heater, it’s also a good idea to estimate its annual operating costs and compare those costs with other less or more energy-efficient models. Visit the pages on different types of water heaters (linked above) for more on estimating costs.

Also be sure to do what you can to reduce your hot water use. You may also want to explore other strategies such as drain-water heat recovery to save money on your water heating bill.

FUEL TYPES, AVAILABILITY AND COSTS FOR WATER HEATING

When selecting a new water heater, it’s important to consider what fuel type or energy source you will use, including its availability and cost. The fuel used by a water heating system will not only affect annual operation costs but also the water heater’s size and energy efficiency.

EXPLORING WATER HEATER OPTIONS BY FUEL TYPE

Fuel type and its availability in your area may narrow your water heater choices. The following is a list of water heater options by fuel or energy source:

  • Electricity
    Widely available in the United States to fuel conventional storage, tankless or demand-type, and heat pump water heaters. It also can be used with combination water and space heating systems, which include tankless coil and indirect water heaters.
  • Fuel oil
    Available in some areas of the United States to fuel conventional storage water heaters, and indirect combination water and space heating systems.
  • Geothermal energy
    Available throughout the United States to those who will have or already have a geothermal heat pump system installed in their homes for space heating and cooling.
  • Natural gas
    Available in many areas of the United States to fuel conventional storage and demand (tankless or instantaneous) water heaters, as well as combination water and space heating systems, which include tankless coil and indirect water heaters.
  • Propane
    Available in many areas of the United States to fuel conventional storage and demand (tankless or instantaneous) water heaters, as well as indirect combination water and space heating systems.
  • Solar energy
    Available throughout the United States — most abundantly in the Southwest — for solar water heaters.

COMPARING FUEL COSTS AND WATER HEATER TYPES

If you have more than one fuel type available in your area, it’s a good idea to compare fuel costs, especially if you’re building a new home. Even if you’re replacing a water heater, you may find that you’ll save more money in the long run if you use a different fuel or energy source. Contact your utility for current fuel costs or rates.

The type of water heater you choose will also affect your water heating costs. One type of water heater may use a fuel type more efficiently than another type of water heater. For example, an electric heat pump water heater typically is more energy efficient than an electric conventional storage water heater. Also, an electric heat pump water heater might have lower energy costs because of its higher efficiency than a gas-fired conventional storage water heater, even though local natural gas costs might be lower than the electricity rates.

Conventional Storage Water Heaters

Conventional storage water heaters remain the most popular type of water heating system for the home. Here you’ll find basic information about how storage water heaters work; what criteria to use when selecting the right model; and some installation, maintenance, and safety tips.

HOW THEY WORK

A single-family storage water heater offers a ready reservoir — from 20 to 80 gallons — of hot water. It operates by releasing hot water from the top of the tank when you turn on the hot water tap. To replace that hot water, cold water enters the bottom of the tank, ensuring that the tank is always full.

Conventional storage water heater fuel sources include natural gas, propane, fuel oil, and electricity. Learn more about fuel types available when selecting a new water heater.

Since water is constantly heated in the tank, energy can be wasted even when a hot water tap isn’t running. This is called standby heat loss. Only tankless water heaters — such as demand-type water heaters and tankless coil water heaters — avoid standby heat losses. Some storage water heater models have heavily insulated tank, which significantly reduce standby heat losses and lower annual operating costs. Look for models with tanks that have a thermal resistance (R-Value) of R-12 to R-25.

Gas and oil water heaters also have venting-related energy losses. Two types of water heaters — a fan-assisted gas water heater and an atmospheric sealed-combustion water heater — reduce these losses. Visit the Energy Basics site to learn more about how conventional storage water heaters work.

You might also want to consider some less conventional storage water heaters — heat pump water heaters and solar water heaters. These water heaters are usually more expensive but they typically have lower annual operating costs.

SELECTING A STORAGE WATER HEATER

The lowest-priced storage water heater may be the most expensive to operate and maintain over its lifetime. While an oversized unit may be alluring, it carries a higher purchase price and increased energy costs due to higher standby energy losses.

Before buying a new storage water heater, consider the following:

  • Size and first hour rating
  • Fuel type and availability
  • Energy efficiency and costs.

HOUSTON WATER HEATER INSTALLATION AND MAINTENANCE

Proper installation and maintenance of your water heater can optimize its energy efficiency.

Proper installation depends on many factors. These factors include fuel type, climate, local building code requirements, and safety issues, especially concerning the combustion of gas- and oil-fired water heaters. Therefore, it’s best to have a qualified plumbing and heating contractor install your storage water heater. Be sure to do the following when selecting a contractor:

  • Request cost estimates in writing
  • Ask for references
  • Check the company with your local Better Business Bureau
  • See if the company will obtain a local permit if necessary and understands local building codes, etc.

If you’re determined to install it yourself, first consult the water heater’s manufacturer. Manufacturers usually have the necessary installation and instruction manuals. Also, contact your city or town for information about obtaining a permit, if necessary, and about local water heater building codes.

Periodic water heater maintenance can significantly extend your water heater’s life and minimize loss of efficiency. Read your owner’s manual for specific maintenance recommendations.

Routine maintenance for storage water heaters, depending on what type/model you have, may include:

  • Flushing a quart of water from the storage tank every three months
  • Checking the temperature and pressure valve every six months
  • Inspecting the anode rod every three to four years.

Demand (Tankless or Instantaneous) Water Heaters

Tankless water heaters, also known as demand-type or instantaneous water heaters, provide hot water only as it is needed. They don’t produce the standby energy losses associated with storage water heaters, which can save you money. Here you’ll find basic information about how they work, whether a tankless water heater might be right for your home, and what criteria to use when selecting the right model.

HOW THEY WORK

Tankless water heaters heat water directly without the use of a storage tank. When a hot water tap is turned on, cold water travels through a pipe into the unit. Either a gas burner or an electric element heats the water. As a result, tankless water heaters deliver a constant supply of hot water. You don’t need to wait for a storage tank to fill up with enough hot water. However, a tankless water heater’s output limits the flow rate.

Typically, tankless water heaters provide hot water at a rate of 2–5 gallons (7.6–15.2 liters) per minute. Gas-fired tankless water heaters produce higher flow rates than electric ones. Sometimes, however, even the largest, gas-fired model cannot supply enough hot water for simultaneous, multiple uses in large households. For example, taking a shower and running the dishwasher at the same time can stretch a tankless water heater to its limit. To overcome this problem, you can install two or more tankless water heaters, connected in parallel for simultaneous demands of hot water. You can also install separate tankless water heaters for appliances — such as a clothes washer or dishwater — that use a lot of hot water in your home.

Other applications for demand water heaters include the following:

  • Remote bathrooms or hot tubs
  • Booster for appliances, such as dishwashers or clothes washers
  • Booster for a solar water heating system.

ADVANTAGES AND DISADVANTAGES

For homes that use 41 gallons or less of hot water daily, demand water heaters can be 24%–34% more energy efficient than conventional storage tank water heaters. They can be 8%–14% more energy efficient for homes that use a lot of hot water — around 86 gallons per day. You can achieve even greater energy savings of 27%–50% if you install a demand water heater at each hot water outlet. ENERGY STAR® estimates that a typical family can save $100 or more per year with an ENERGY STAR qualified tankless water heater.

The initial cost of a tankless water heater is greater than that of a conventional storage water heater, but tankless water heaters will typically last longer and have lower operating and energy costs, which could offset its higher purchase price. Most tankless water heaters have a life expectancy of more than 20 years. They also have easily replaceable parts that extend their life by many more years. In contrast, storage water heaters last 10–15 years.

Tankless water heaters can avoid the standby heat losses associated with storage water heaters. However, although gas-fired tankless water heaters tend to have higher flow rates than electric ones, they can waste energy if they have a constantly burning pilot light. This can sometimes offset the elimination of standby energy losses when compared to a storage water heater. In a gas-fired storage water heater, the pilot light heats the water in the tank so the energy isn’t wasted.

The cost of operating a pilot light in a tankless water heater varies from model to model. Ask the manufacturer how much gas the pilot light uses for the model you’re considering. If you purchase a model that uses a standing pilot light, you can always turn it off when it’s not in use to save energy. Also consider models that have an intermittent ignition device (IID) instead of a standing pilot light. This device resembles the spark ignition device on some gas kitchen ranges and ovens.

SELECTING A DEMAND WATER HEATER

Before buying a demand water heater, you also need to consider the following:

  • Size
  • Fuel type and availability
  • Energy efficiency (energy factor)
  • Costs

INSTALLATION AND MAINTENANCE

Proper installation and maintenance of your demand water heater can optimize its energy efficiency.

Proper installation depends on many factors. These factors include fuel type, climate, local building code requirements, and safety issues, especially concerning the combustion of gas-fired water heaters. Therefore, it’s best to have a qualified plumbing and heating contractor install your demand water heater. Do the following when selecting a contractor:

  • Request cost estimates in writing
  • Ask for references
  • Check the company with your local Better Business Bureau
  • See if the company will obtain a local permit if necessary and understands local building codes.

If you’re determined to install your water heater yourself, first consult the manufacturer. Manufacturers usually have the necessary installation and instruction manuals. Also, contact your city or town for information about obtaining a permit, if necessary, and about local water heater installation codes.

back to Top

Solar Water Heaters

Solar water heaters—also called solar domestic hot water systems—can be a cost-effective way to generate hot water for your home. They can be used in any climate, and the fuel they use—sunshine—is free.

How They Work

Solar water heating systems include storage tanks and solar collectors. There are two types of solar water heating systems: active, which have circulating pumps and controls, and passive, which don’t.

Most solar water heaters require a well-insulated storage tank. Solar storage tanks have an additional outlet and inlet connected to and from the collector. In two-tank systems, the solar water heater preheats water before it enters the conventional water heater. In one-tank systems, the back-up heater is combined with the solar storage in one tank.

Three types of solar collectors are used for residential applications:

  • Flat-plate collector

    Glazed flat-plate collectors are insulated, weatherproofed boxes that contain a dark absorber plate under one or more glass or plastic (polymer) covers. Unglazed flat-plate collectors—typically used for solar pool heating—have a dark absorber plate, made of metal or polymer, without a cover or enclosure.

  • Integral collector-storage systems

    Also known as ICS or batch systems, they feature one or more black tanks or tubes in an insulated, glazed box. Cold water first passes through the solar collector, which preheats the water. The water then continues on to the conventional backup water heater, providing a reliable source of hot water. They should be installed only in mild-freeze climates because the outdoor pipes could freeze in severe, cold weather.

  • Evacuated-tube solar collectors

    They feature parallel rows of transparent glass tubes. Each tube contains a glass outer tube and metal absorber tube attached to a fin. The fin’s coating absorbs solar energy but inhibits radiative heat loss. These collectors are used more frequently for U.S. commercial applications.

There are two types of active solar water heating systems:

  • Direct circulation systems
    Pumps circulate household water through the collectors and into the home. They work well in climates where it rarely freezes.

  • Indirect circulation systems
    Pumps circulate a non-freezing, heat-transfer fluid through the collectors and a heat exchanger. This heats the water that then flows into the home. They are popular in climates prone to freezing temperatures.

Passive solar water heating systems are typically less expensive than active systems, but they’re usually not as efficient. However, passive systems can be more reliable and may last longer. There are two basic types of passive systems:

  • Integral collector-storage passive systems
    These work best in areas where temperatures rarely fall below freezing. They also work well in households with significant daytime and evening hot-water needs.

  • Thermosyphon systems
    Water flows through the system when warm water rises as cooler water sinks. The collector must be installed below the storage tank so that warm water will rise into the tank. These systems are reliable, but contractors must pay careful attention to the roof design because of the heavy storage tank. They are usually more expensive than integral collector-storage passive systems.

Solar water heating systems almost always require a backup system for cloudy days and times of increased demand. Conventional storage water heaters usually provide backup and may already be part of the solar system package. A backup system may also be part of the solar collector, such as rooftop tanks with thermosyphon systems. Since an integral-collector storage system already stores hot water in addition to collecting solar heat, it may be packaged with a demand (tankless or instantaneous) water heater for backup.

Tankless Coil and Indirect Water Heaters

Tankless coil and indirect water heaters use a home’s space heating system to heat water. They’re part of what’s called integrated or combination water and space heating systems.

How They Work

A tankless coil water heater uses a heating coil or heat exchanger installed in a main furnace or boiler.

Whenever a hot water faucet is turned on, the water flows through the heat exchanger. These water heaters provide hot water on demand without a tank, like a demand water heater, but because they rely on the furnace or boiler to heat the water directly, tankless coil water heaters work most efficiently during cold months when the heating system is used regularly. That’s why they can be an inefficient choice for many homes, especially for those in warmer climates.

Indirect water heaters offer a more efficient choice for most homes, even though they require a storage tank. An indirect water heater uses the main furnace or boiler to heat a fluid that’s circulated through a heat exchanger in the storage tank. The energy stored by the water tank allows the furnace to turn off and on less often, which saves energy. Therefore, an indirect water heater is used with a high-efficiency boiler and well-insulated tank can be the least expensive means of providing hot water.

Indirect systems can be fired by gas, oil, propane, electric, solar energy, or a combination of any of these. Tankless systems are typically electric or gas-fired. Also, these integrated or combination water heating systems not only can work with forced air systems but also with hydronic or radiant floor heating systems.

Heat Pump Water Heaters

Most homeowners who have heat pumps use them to heat and cool their homes. But a heat pump also can be used to heat water — either as stand-alone water heating system, or as combination water heating and space conditioning system.

HOW THEY WORK

Heat pump water heaters use electricity to move heat from one place to another instead of generating heat directly. Therefore, they can be two to three times more energy efficient than conventional electric resistance water heaters. To move the heat, heat pumps work like a refrigerator in reverse.

While a refrigerator pulls heat from inside a box and dumps it into the surrounding room, a stand-alone air-source heat pump water heater pulls heat from the surrounding air and dumps it — at a higher temperature — into a tank to heat water. You can purchase a stand-alone heat pump water heating system as an integrated unit with a built-in water storage tank and back-up resistance heating elements. You can also retrofit a heat pump to work with an existing conventional storage water heater.

Heat pump water heaters require installation in locations that remain in the 40º–90ºF (4.4º–32.2ºC) range year-round and provide at least 1,000 cubic feet (28.3 cubic meters) of air space around the water heater. Cool exhaust air can be exhausted to the room or outdoors. Install them in a space with excess heat, such as a furnace room. Heat pump water heaters will not operate efficiently in a cold space. They tend to cool the spaces they are in. You can also install an air-source heat pump system that combines heating, cooling, and water heating. These combination systems pull their heat indoors from the outdoor air in the winter and from the indoor air in the summer. Because they remove heat from the air, any type of air-source heat pump system works more efficiently in a warm climate.

Homeowners primarily install geothermal heat pumps — which draw heat from the ground during the winter and from the indoor air during the summer — for heating and cooling their homes. For water heating, you can add a desuperheater to a geothermal heat pump system. A desuperheater is a small, auxiliary heat exchanger that uses superheated gases from the heat pump’s compressor to heat water. This hot water then circulates through a pipe to the home’s storage water heater tank.

Desuperheaters are also available for tankless or demand-type water heaters. In the summer, the desuperheater uses the excess heat that would otherwise be expelled to the ground. Therefore, when the geothermal heat pump runs frequently during the summer, it can heat all of your water.

During the fall, winter, and spring — when the desuperheater isn’t producing as much excess heat — you’ll need to rely more on your storage or demand water heater to heat the water. Some manufacturers also offer triple-function geothermal heat pump systems, which provide heating, cooling, and hot water. They use a separate heat exchanger to meet all of a household’s hot water needs.

SELECTING A HEAT PUMP WATER HEATER

Heat pump water heater systems typically have higher initial costs than conventional storage water heaters. However, they have lower operating costs, which can offset their higher purchase and installation prices.

Before buying a heat pump water heating system, you also need to consider the following:

  • Size and first hour rating
  • Fuel type and availability
  • Energy efficiency (energy factor)
  • Overall costs

If you’re considering installing an integrated water heating, space heating, and cooling heat pump system in your home, also see our information about air-source heat pumps and geothermal heat pumps.

INSTALLATION AND MAINTENANCE

Proper installation and maintenance of your heat pump water heating system can optimize its energy efficiency.

Proper installation depends on many factors. These factors include fuel type, climate, local building code requirements, and safety issues. Therefore, it’s best to have a qualified plumbing and heating contractor (or geothermal heat pump system installer/designer) install your heat pump.

Do the following when selecting a qualified professional:

  • Request cost estimates in writing
  • Ask for references
  • Check the company with your local Better Business Bureau
  • See if the company will obtain a local permit if necessary and understands local building codes.

Periodic water heater maintenance can significantly extend your water heater’s life and minimize loss of efficiency. Read your owner’s manual for specific maintenance recommendations.

Our Real Time Service Area

Local Reviews

Wedgeworth Plumbing Rated 5.0 out of 5 stars based on 32 customer reviews

Map of Dickinson, TX

Great




Review of Wedgeworth Plumbing

Very informative about my water heater situation. Pleasant and professional.


Map of Houston, TX

Great service. Thanks.




Review of Wedgeworth Plumbing


Map of Houston, TX

Great partner on bathroom addition




Review of Wedgeworth Plumbing

We really love the bathroom Sean and his team added in a space many plumbers found difficult to achieve. He worked closely with me to orchestrate wall building and not impede their progress. He proactively advised me throughout the process on how to achieve the desired result.


Map of Houston, TX

Great service




Review of Wedgeworth Plumbing

Plumbers (Rex and T.J.) arrived on time. Very professional. Explained what needed to be done. Got to work. After work was completed, cleaned everything up.


Map of Houston, TX

Excellent Service




Review of Wedgeworth Plumbing

Prompt, polite, knowledgeable and efficient. Describes my experience with Wedge Plumbing and Damondrick. Will use again and recommend


Map of Houston, TX

Great service and great guys




Review of Wedgeworth Plumbing

Great experience from Rex and TJ.


Map of Houston, TX

Great Service




Review of Wedgeworth Plumbing

Rex is as his business card states a “Remarkable Plumber”. He did a very thorough job using his skills and expertise to fix the problem. This makes my future plumbing decision easy.... Wedgeworth. Remember 867-5390 (Jenny) 🎶


Map of Houston, TX

Plumbing bar




Review of Wedgeworth Plumbing


Map of Houston, TX

Great service!




Review of Wedgeworth Plumbing

Called and they were able to come same day! Fabulous! Diagnosed the problem when water leaked from underneath the toilet bowl while washing machine was running in the next room, Rex diligently fixed the problem with the rotar router into the toilet bowl and the hole where the water flows from the washing machine. Clog was removed and washing machine is running again with wash and no leaks from under the toilet bowl! Yea!


Map of Houston, TX

Wonderful service!




Review of Wedgeworth Plumbing


Best service in town!




Review of Wedgeworth Plumbing

James with Wedgeworth Pluming came out to help us with a main drain clog. I had another company come out the day before and he stated that the clog was in the city line. We contacted the city they said it was no clog in their drains. A friend referred me to Wedgeworth Plumbing and I'm so glad they did. James was on time, very courteous and knowledgeable. He answered all my questions and unclogged the main drain. I was also very pleased with the price. I couldn't thank y'all enough for doing such a great job. Many Thanks, Miranda Williams & Joanne Knotts


Courteous service.




Review of Wedgeworth Plumbing


High quality installation




Review of Wedgeworth Plumbing

We needed new faucets installed to upgrade a master bathroom. The installation was not a simple replacement as we changed to a brand that required soldering. After several bids we chose Wedgeworth even though their bid was higher as it reflected the difficulty of the install. Other potential installers either did not notice the issues or suggested we choose another brand. The professionalism, attention to detail and expertise by Damondrick and Brian were impressive.


Great service, fast!




Review of Wedgeworth Plumbing

Just needed angle stops replaced. Rex was professional, courteous, and fast! I knew it shouldn’t take too long but he was done so fast. Definitely my go to for plumbing needs!


Great Servic




Review of Wedgeworth Plumbing

Rex is always on time and gets the job done!!


Friendly and fast service




Review of Wedgeworth Plumbing

Damondrick explained what will be done and show the price. Once we agreed, he got right to work. Cleaned up the work area and I am happy with the service.


Great Service, Great Price.




Review of Wedgeworth Plumbing

Great service. Very timely. Very courteous. Appreciate everything.


Drain clogged.




Review of Wedgeworth Plumbing


Wedgeworth plumbing




Review of Wedgeworth Plumbing

Damondrick Ana his helper were awesome, very professional, polite and efficient


Wonderful service!




Review of Wedgeworth Plumbing

Damondrick and crew were extremely helpful and completed all the work as timely as they could. Even though all work could not be completed, they made sure to explain all issues and let us know they would complete the work as soon as the special ordered parts arrived. Very pleased with the work quality and the price!


Damondrick B.

Damondrick B.

Rebuilt the hall bathroom tub/shower

Near Chevy Chase Dr, Houston, TX 77042
Houston, TX - Rebuilt the hall bathroom tub/shower
Damondrick B.

Damondrick B.

Rebuilt garage aptmnt toilet.

Near Amherst St, Houston, TX 77005
Houston, TX - Rebuilt garage aptmnt toilet.
Damondrick B.

Damondrick B.

Looped dishwasher drain hose for proper drainage.

Near Mossycup Dr, Houston, TX 77024
Houston, TX - Looped dishwasher drain hose for proper drainage.
Damondrick B.

Damondrick B.

Replaced the gas control valve/thermostat for the water heater.

Near Carmel Woods Dr, Seabrook, TX 77586
Seabrook, TX - Replaced the gas control valve/thermostat for the water heater.
Damondrick B.

Damondrick B.

Diagnosed tub/shower valve

Near W 16th St, Houston, TX 77008
Houston, TX - Diagnosed tub/shower valve
Sean G.

Sean G.

Repair sewer drain add cleanout

Near Shadow Creek Dr, El Lago, TX 77586
El Lago, TX - Repair sewer drain add cleanout
Rex R.

Rex R.

Dripping shower

Near Lizette Ct, Houston, TX 77075
Rex R.

Rex R.

Kitchen faucet install

Near Acorn Wood Way, Houston, TX 77059
Rex R.

Rex R.

Shower repair

Near Fontana Dr, Houston, TX 77043
Sean G.

Sean G.

water heater diagnostic

Near Johnson St, Houston, TX 77007
Houston, TX - water heater diagnostic